Blacksmithing Terms


All | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | Other


All

There are 13 entries in the glossary.
Pages: 1

Term Definition
AnvilShaped surface of heavy steel on which hot metal is hammered
 
Ball-peen hammerHammer with a rounded-back face
 
BoraxSubstance used as welding fluxto seal out oxygen, which forms scale
 
Carbon contentAmount or degree of carbon in steel.
 
Carbon SteelSteel that has enough carbon content to harden for use as tools. Usuall between 0.5% and 0.9%.
 
Draw a piece of ironTo flatten, extend by heating and hammering; to stretch
 
Drift outTo enlarge, as a hole
 
Forge WeldTo join iron/steel by hammering while white hot
 
Heat TreatingCombination of hardening and tempering steels and other metals.
 
NormalizeTo cool a heated metal in the air to its normal hardness. Often slowly.
 
Spring steelSteel of high carbon content used for springs.
 
TemperTo regulate hardness in metal by controlled heating.
 
UpsetTo thicken by hammering into a mass, as opposed to strtching or drawing out.
 


Glossary V1.8

find_us_on_facebook_badge.gif

 

Upcoming Courses

Thu, Sep 17th, @7:30pm
Sharpening
Thu, Oct 15th, @7:30pm
Sharpening
Fri, Oct 16th, @7:00pm
Knifemaking
Thu, Dec 10th, @7:30pm
Sharpening
Fri, Dec 11th, @7:00pm
Knifemaking

Knifemaking Tip

“Use an old magnet from a speaker on the side of the fridge to safely store your knife”
-Common sense

Essential Supplies

From our Store

Knifemaking Steel

High carbon steel for bladesmithing. Excellent for forging and heat treating. The steel works well under the hammer and the size is perfect for a range of small to medium blade. This is a simple steel that is oil quenched and shows hamon lines very clearly when heat treated correctly. Perfect for Japanese style blades. You should get between 4 and 6 blades per length. 15N20 is the same as 1075 with an additional 2% nickel. It makes a high contrast pattern when combined with either 1075 or 1055 in Damascus steel.

  • 1055 - 4mm x 25mm x 530mm (annealed) 400g - $10 per length
  • 1075 - 3mm x 25mm x 450mm (spring tempered) 250g - $15 per length
  • 15N20 - 2mm x 25mm x 500mm (annealed) 200g - $15 per length

Postage/freight extra. This is in limited supply so contact us now to order.

 

Knives for Sale

From our Forge


Damascus skinner detail
Damascus Belt Buckle back
Damascus Belt Buckle
Damascus Skinner

Recommended Reading

More Recommended Books