Fantastic knife vices from Alistair Phillips. These bench mounted vices allow up to a 6" blade to be held to either work on he handle or the blade. Larger vices can be made to order.
Perfect for hand finishing blades or filework. Allows full rotation in working on handles to ensure a high standard of finish.
$50 + POSTAGE
Please contact us at Tharwa Valley Forge for more information
“Store your knives in a knife block either horizontally or upside down, so the edge doesn't wear against the block each time you take them out” -Common sense
Essential Supplies
From our Store
Knifemaking Steel
High carbon steel for bladesmithing. Excellent for forging and heat treating. The steel works well under the hammer and the size is perfect for a range of small to medium blade. This is a simple steel that is oil quenched and shows hamon lines very clearly when heat treated correctly. Perfect for Japanese style blades. You should get between 4 and 6 blades per length. 15N20 is the same as 1075 with an additional 2% nickel. It makes a high contrast pattern when combined with either 1075 or 1055 in Damascus steel.
1055 - 4mm x 25mm x 530mm (annealed) 400g - $10 per length
1075 - 3mm x 25mm x 450mm (spring tempered) 250g - $15 per length
15N20 - 2mm x 25mm x 500mm (annealed) 200g - $15 per length
Postage/freight extra. This is in limited supply so contact us now to order.
Fantastic knife vices from Alistair Phillips. These bench mounted vices allow up to a 6" blade to be held to either work on he handle or the blade. Larger vices can be made to order. 
