High carbon steel for bladesmithing. Excellent for forging and heat treating. The steel works well under the hammer and the size is perfect for a range of small to medium blade. This is a simple steel that is oil quenched and shows hamon lines very clearly when heat treated correctly. Perfect for Japanese style blades. You should get between 4 and 6 blades per length. 15N20 is the same as 1075 with an additional 2% nickel. It makes a high contrast pattern when combined with either 1075 or 1055 in Damascus steel.
1055 - 4mm x 25mm x 530mm (annealed) 400g - $10 per length
1075 - 3mm x 25mm x 450mm (spring tempered) 250g - $15 per length
15N20 - 2mm x 25mm x 500mm (annealed) 200g - $15 per length
Postage/freight extra. This is in limited supply so contact us now to order.
“The quality of your work depends on your dedicaton and your determination” -Jerry Fisk
From a recent course
Essential Supplies
From our Store
Knifemaking Gas Forge
Tharwa Valley Forge is pleased to offer our propane powered knife making forges. These forges are the same design as used in our courses. Dimensions are 30cm long with a 24cm wide barrel chamber. Custom sizes are available on request. The forges come fully lined with a gas burner and fittings. You just nned to add a gas bottle. It gets up to welding temperature in 10 minutes and has a good reducing atmosphere for forging Damascus. Clean, compact and fast way to forge your own blades.
Tharwa Valley Forge is pleased to offer our propane powered knife making forges. These forges are the same design as used in our courses. Dimensions are 30cm long with a 24cm wide barrel chamber. Custom sizes are available on request. The forges come fully lined with a gas burner and fittings. You just nned to add a gas bottle. It gets up to welding temperature in 10 minutes and has a good reducing atmosphere for forging Damascus. Clean, compact and fast way to forge your own blades.
